Light Buff
Light swirls & minor defects
Starting at $299
Typical time · ~2 hours
- ✓Light machine buff
- ✓Swirl mark reduction
- ✓Surface gloss enhancement
- ✓Minor scratch reduction
- ✓Hand wipe & inspection
- ✓Exterior rinse & dry
ORLANDO, FL · CUT & BUFFING
Cut and Buff in Orlando, FL
Machine compounding and cut correction brought to your driveway by a trained crew
Our mobile cut and buffing crew brings machine compounding and paint restoration to your location across Orlando, Oviedo, Daytona Beach, and surrounding areas. Heavy oxidation removed, scratches treated, finishing polish applied on-site at your driveway or office. Done right, at your door.
4.9 StarsFully InsuredMobile ServiceExperienced Technicians
ABOUT THIS SERVICE
Orlando Cut & Buff — Heavy Scratch & Oxidation Removal
Mineral Deposits Can Permanently Mark Clearcoat
Water spots left baking on paint eventually etch below the surface, leaving behind physical damage that remains visible even after the minerals themselves are removed.
How Professional Cut And Buff Removes Etching
Our mobile cut and buff service uses polishing stages matched to the depth of the etching so the damaged clearcoat can be leveled safely.
Want the full picture? Visit our cut & buffing service page for a complete breakdown of what's included, how our pricing works, and what to expect.
OUR PROCESS
How We Perform Cut & Buffing
Every cut & buffing job follows this exact process — no shortcuts, no skipped steps.
- 01
Inspection + Thickness Measurement
Paint-thickness gauge readings on every panel set the safe cut range. We will not cut a panel that cannot support it — we recommend a different approach instead.
- 02
Decontamination Wash
Heavy foam wash, iron-fallout chemistry, and clay-bar pass. Compound on dirty paint creates more defects than it removes — full decon is non-negotiable.
- 03
Test Spot
Compound and pad selection is confirmed on a hidden test panel. We adjust speed, pressure, and product before working the rest of the vehicle.
- 04
Heavy-Cut Pass
Rotary or forced-rotation polisher with cutting compound and pad — removes the oxidized or damaged layer of clear coat. Worked panel-by-panel with cooling and re-evaluation.
- 05
Intermediate + Finishing Polish
Two-pad refinement system — first intermediate polish to remove micro-marring from the cut, then finishing polish on a soft pad to bring out the deepest gloss.
- 06
Lock-In Protection
Premium sealant or coating-ready prep. After a heavy cut, the paint is more vulnerable to re-oxidation — protection is critical and not optional.
PRICING
Cut & Buff Packages
Prices for sedans and compact SUVs — other vehicles may cost extra.
MOST POPULARHeavy Cut & Buff
Deeper scratches & paint refinement
Starting at $359
Typical time · ~3 hours
- ✓Heavy machine cut
- ✓Deep swirl removal
- ✓Paint clarity restoration
- ✓Moderate scratch treatment
- ✓Machine polish finish
- ✓Exterior rinse & dry
Heavy Cut & Buff + Oxidation
Heavily oxidized & neglected paint
Starting at $599
Typical time · ~4 hours
- ✓Everything in Heavy Cut & Buff
- ✓Full oxidation removal
- ✓Paint color restoration
- ✓Heavy scratch & etching treatment
- ✓Multi-stage machine polish
- ✓Exterior rinse & final QC wipe
All prices listed are for sedans and compact SUVs. Full-size SUVs, trucks, vans, RVs, and boats may be priced slightly higher. Final quote confirmed before we start — no surprise charges.
Need a custom build? Customize your package →
Our Work
Real Results from Across the Country
Every photo below comes from a verified customer booking. No stock images. No staged shots.
Sports car
Sports sedan
Adventure motorcycle
Class A motorhome
Boat exterior
Cabin cruiser
Car interior
Touring motorcycle
Electric sedan
VEHICLE COMPATIBILITY
Cut & Buffing for Every Vehicle We Service
Cut & Buffing works on every vehicle type — the process is the same, the scale changes. Choose a vehicle category to open the matching local page for Orlando.
Cars, SUVs & Trucks Detailing in Orlando
Sedans, coupes, hatchbacks, SUVs, and pickups — packages, pricing, and booking for your area.
View packagesBoats Detailing in Orlando
Hull, deck, and cabin-capable mobile service — see boat packages for your market.
View packagesMotorcycle Detailing in Orlando
Paint, chrome, wheels, and seat care scaled for bikes.
View packagesRVs Detailing in Orlando
Exterior, roof, and cabin work for motorhomes, fifth wheels, and campers.
View packagesWHY GO PROFESSIONAL
Why DIY Cut & Buff Is Risky
This is the service where bad technique permanently damages paint. We do not assume — we measure.
Burning Through Clear Coat
Compound on a rotary on thin clear coat will burn through to the base layer in seconds. We measure thickness, work cool, and pull off as soon as the panel reaches its safe cut limit.
Hologram Damage
Rotary polishers in inexperienced hands create permanent hologram patterns that show under direct sunlight. Dual-action and forced-rotation tools, plus refinement steps, eliminate that risk.
Edges and Body Lines
Edges, body lines, and panel seams have thinner clear coat — these are the spots where DIY cuts go wrong. We tape, slow down, and adjust pressure on edges.
No Refinement Step
Cutting alone leaves micro-marring even on flat panels. The intermediate and finishing polish steps are how the cut work actually looks like new — not a hazy patchy mess.
SERVICE AREA
Cut & Buffing Across Orlando
We perform cut & buffing at your location throughout Orlando and the surrounding metro — including:
Altamonte SpringsAltoonaAlturasApopkaAstatulaAstorAuburndaleBabson ParkBarbervilleBartowBelleviewBrooksvilleBushnellCandlerCape Canaveral
Not in the list? Call us — we cover more than what's listed.
WHAT CUSTOMERS SAY
Rated 4.9 Stars for Cut & Buffing in Orlando
Orlando drivers trust us with their vehicles
FREQUENTLY ASKED QUESTIONS
Cut & Buffing Questions — Answered
Can you save my severely faded paint?
Often yes — if there is enough clear coat to safely cut, we can restore depth and gloss. We measure first. If the clear coat is too thin, we will tell you upfront and recommend a different path.
Is cut & buffing the same as paint correction?
Cut & buffing is the heaviest stage of paint correction. Standard paint correction handles light-to-medium defects; cut & buffing addresses heavy oxidation and deeper damage. The technique is the same — the products and amount of material removed are different.
Will this work on my oxidized RV or boat?
Yes — gelcoat is a different material than clear coat but cuts and refines on the same principles. We use marine-grade compound and the appropriate pads.
How long does the result last?
Sealant-protected: 6–12 months before maintenance polish is recommended. Ceramic-coated: years. Without protection, heavily cut paint will re-oxidize faster than original paint.
Will my paint be thinner after?
Yes — but within safe limits. Standard clear coat is 40–80 microns. Light cut removes ~5 microns. Heavy cut removes 10–20 microns. We measure before and after every panel.
Do you do this at my home?
Yes — in your garage or driveway. We control conditions as much as possible. A covered garage is preferred for the multi-step process.
RELATED SERVICES
Services That Pair Well With Cut & Buffing
These are our other specialty detailing services in Orlando, FL, including Altamonte Springs, Altoona, and Alturas and surrounding areas. Each service is mobile — we come to your driveway, office lot, marina, or storage location with packages and booking for your market.
Interior Detailing in Orlando
Deep cabin cleaning, extraction, leather care, and odor treatment at your location
ViewExterior Detailing in Orlando
Hand wash, decontamination, polish, and protection for paint, wheels, and glass
ViewCeramic Coating in Orlando
Long-term ceramic protection after full paint prep and correction
ViewPaint Correction in Orlando
Multi-step correction for swirls, haze, and deeper paint defects
ViewWaxing & Sealants in Orlando
Hand wax or synthetic sealant to lock in gloss after a full detail
ViewClay Bar & Polishing in Orlando
Clay decontamination and finishing polish before protection layers
ViewFrom the Blog
Detailing Tips & Guides for Orlando
Practical advice for drivers in Orlando — maintenance, protection, and what to expect from professional mobile detailing.
Cut & Buffing
What Is Cut and Buff? How Machine Compounding Restores Paint
Cut and buff is the two-step machine process that levels clear coat defects with compound, then restores gloss with polish. Here's exactly what each step does.
Read time: 3 min
Read the Guide
Cut & Buffing
How Much Does a Cut and Buff Cost? (2026 Price Guide)
Wondering about cut and buff cost? See real price ranges by vehicle size, what affects the bill, and when a cut and buff is worth it.
Read time: 5 min
Read the Guide
Cut & Buffing
How to Tell If a Scratch Is in the Clear Coat or the Paint
The fingernail test plus a careful visual inspection tells you whether a scratch can be polished out or needs touch-up paint. Here's how to check.
Read time: 3 min
Read the GuidePEOPLE ALSO SEARCH FOR
Serving Orlando and Surrounding Areas
Enter your ZIP code to confirm we cover your address in Orlando and nearby communities.
Book Your Cut & Buffing in Orlando Today
Mobile cut & buffing at your location with transparent pricing and reliable scheduling.
Fully insured team
Certified technician
Own water and power
On-site completion
Satisfaction guaranteed