Light Buff
Light swirls & minor defects
Starting at $299
Typical time · ~2 hours
- ✓Light machine buff
- ✓Swirl mark reduction
- ✓Surface gloss enhancement
- ✓Minor scratch reduction
- ✓Hand wipe & inspection
- ✓Exterior rinse & dry
JACKSONVILLE, FL · CUT & BUFFING
Paint Gloss Restoration in Jacksonville, FL
Machine compounding and cut correction brought to your driveway by a trained crew
Machine compounding and cut correction performed at your location. Our mobile crew serves Jacksonville, Hilliard, Bryceville, and surrounding areas, handling heavy oxidation removal, scratch treatment, and finishing polish on-site at your driveway or office. No shop visit required.
4.9 Rating in JacksonvilleFully Insured100% Satisfaction GuaranteedMobile — We Come to You
ABOUT THIS SERVICE
Why Cut And Buff Is Important Before Ceramic Coating
Ceramic Coating Locks The Current Surface Condition In Place
Any swirl marks, haze, scratches, or oxidation left in the paint before coating application become permanently sealed beneath the coating layer afterward.
How Professional Cut And Buff Prepares Paint For Coating
Our mobile cut and buff service corrects visible defects before ceramic coating installation so the coating bonds to the cleanest and clearest possible paint surface.
OUR PROCESS
How We Perform Cut & Buffing
Every cut & buffing job follows this exact process — no shortcuts, no skipped steps.
- 01
Inspection + Thickness Measurement
Paint-thickness gauge readings on every panel set the safe cut range. We will not cut a panel that cannot support it — we recommend a different approach instead.
- 02
Decontamination Wash
Heavy foam wash, iron-fallout chemistry, and clay-bar pass. Compound on dirty paint creates more defects than it removes — full decon is non-negotiable.
- 03
Test Spot
Compound and pad selection is confirmed on a hidden test panel. We adjust speed, pressure, and product before working the rest of the vehicle.
- 04
Heavy-Cut Pass
Rotary or forced-rotation polisher with cutting compound and pad — removes the oxidized or damaged layer of clear coat. Worked panel-by-panel with cooling and re-evaluation.
- 05
Intermediate + Finishing Polish
Two-pad refinement system — first intermediate polish to remove micro-marring from the cut, then finishing polish on a soft pad to bring out the deepest gloss.
- 06
Lock-In Protection
Premium sealant or coating-ready prep. After a heavy cut, the paint is more vulnerable to re-oxidation — protection is critical and not optional.
PRICING
Cut & Buff Packages
Prices for sedans and compact SUVs — other vehicles may cost extra.
MOST POPULARHeavy Cut & Buff
Deeper scratches & paint refinement
Starting at $359
Typical time · ~3 hours
- ✓Heavy machine cut
- ✓Deep swirl removal
- ✓Paint clarity restoration
- ✓Moderate scratch treatment
- ✓Machine polish finish
- ✓Exterior rinse & dry
Heavy Cut & Buff + Oxidation
Heavily oxidized & neglected paint
Starting at $599
Typical time · ~4 hours
- ✓Everything in Heavy Cut & Buff
- ✓Full oxidation removal
- ✓Paint color restoration
- ✓Heavy scratch & etching treatment
- ✓Multi-stage machine polish
- ✓Exterior rinse & final QC wipe
All prices listed are for sedans and compact SUVs. Full-size SUVs, trucks, vans, RVs, and boats may be priced slightly higher. Final quote confirmed before we start — no surprise charges.
Need a custom build? Customize your package →
Proof Of Work
Our Work
Real results from real jobs across cars, boats, and RVs.
Motorcycle Detail
Boat Detail
Truck Detail
RV Detail
Car Detail
Car Detail
VEHICLE COMPATIBILITY
Cut & Buffing for Every Vehicle We Service
Cut & Buffing works on every vehicle type — the process is the same, the scale changes. Choose a vehicle category to open the matching local page for Jacksonville.
Cars, SUVs & Trucks
Sedans, coupes, hatchbacks, SUVs, and pickups — packages, pricing, and booking for your area.
View packagesBoats
Hull, deck, and cabin-capable mobile service — see boat packages for your market.
View packagesMotorcycle
Paint, chrome, wheels, and seat care scaled for bikes.
View packagesRVs
Exterior, roof, and cabin work for motorhomes, fifth wheels, and campers.
View packagesWHY GO PROFESSIONAL
Why DIY Cut & Buff Is Risky
This is the service where bad technique permanently damages paint. We do not assume — we measure.
Burning Through Clear Coat
Compound on a rotary on thin clear coat will burn through to the base layer in seconds. We measure thickness, work cool, and pull off as soon as the panel reaches its safe cut limit.
Hologram Damage
Rotary polishers in inexperienced hands create permanent hologram patterns that show under direct sunlight. Dual-action and forced-rotation tools, plus refinement steps, eliminate that risk.
Edges and Body Lines
Edges, body lines, and panel seams have thinner clear coat — these are the spots where DIY cuts go wrong. We tape, slow down, and adjust pressure on edges.
No Refinement Step
Cutting alone leaves micro-marring even on flat panels. The intermediate and finishing polish steps are how the cut work actually looks like new — not a hazy patchy mess.
SERVICE AREA
Cut & Buffing Across Jacksonville
We perform cut & buffing at your location throughout Jacksonville and the surrounding metro — including:
Atlantic BeachBostwickBrookerBrycevilleCallahanDoctors InletEarletonEast PalatkaElktonFernandina BeachFleming IslandFlorahomeFolkstonGlen Saint MaryGraham
Not in the list? Call us — we cover more than what's listed.
WHAT CUSTOMERS SAY
Rated 4.9 Stars for Cut & Buffing in Jacksonville
Jacksonville drivers trust us with their vehicles
FREQUENTLY ASKED QUESTIONS
Cut & Buffing Questions — Answered
Often yes — if there is enough clear coat to safely cut, we can restore depth and gloss. We measure first. If the clear coat is too thin, we will tell you upfront and recommend a different path.
Cut & buffing is the heaviest stage of paint correction. Standard paint correction handles light-to-medium defects; cut & buffing addresses heavy oxidation and deeper damage. The technique is the same — the products and amount of material removed are different.
Yes — gelcoat is a different material than clear coat but cuts and refines on the same principles. We use marine-grade compound and the appropriate pads.
Sealant-protected: 6–12 months before maintenance polish is recommended. Ceramic-coated: years. Without protection, heavily cut paint will re-oxidize faster than original paint.
Yes — but within safe limits. Standard clear coat is 40–80 microns. Light cut removes ~5 microns. Heavy cut removes 10–20 microns. We measure before and after every panel.
Yes — in your garage or driveway. We control conditions as much as possible. A covered garage is preferred for the multi-step process.
RELATED SERVICES
Services That Pair Well With Cut & Buffing
Customers often combine this service with one of the following for a complete result.
Paint Correction
Lighter cut stages for less severe defects
ViewCeramic Coating
Strongly recommended after a heavy cut — locks in the restored finish
ViewExterior Detailing
Maintenance program after cut & buffing to keep the finish lasting
ViewClay Bar & Polishing
Lighter prep step when full cut is not needed
ViewWaxing & Sealants
Short-term protection for vehicles not ready for a ceramic coating
ViewBook Your Cut & Buffing in Jacksonville Today
Mobile cut & buffing at your location with transparent pricing and reliable scheduling.
Fully insured team
Certified technician
Own water and power
On-site completion
Satisfaction guaranteed
From the Blog
Detailing Tips & Guides
Learn how to keep your vehicle looking its best between professional details.