1-Year Ceramic
Short-term paint protection
Starting at $699
Protection · ~12 months
- ✓Prep wash included
- ✓Polish included
- ✓Ceramic coating application
- ✓Hydrophobic water repellency
- ✓UV protection layer
- ✓Surface gloss enhancement
SEATTLE, WA · CERAMIC COATING
Ceramic Coating in Seattle, WA
Long-term paint protection applied on-site, properly prepped and professionally done
From wax stripping and surface decontamination to paint correction and ceramic coating application, our mobile crew handles the full process at your location across Seattle, Puyallup, Issaquah, and surrounding areas. Long-term protection applied properly, on-site, without a shop visit.
4.9 StarsFully InsuredMobile ServiceExperienced Technicians
ABOUT THIS SERVICE
Seattle Ceramic Coating — 3–5 Year Protection vs Rain
Contamination Releases More Easily From Protected Surfaces
Unprotected paint holds dirt and road film tightly against the clearcoat, increasing friction during washing and raising the chance of swirl marks and wash-induced scratches.
How Professional Ceramic Coating Reduces Wash Friction
Our ceramic coating installation process creates a smoother hydrophobic surface that helps contamination release more easily during hand washing and maintenance cleaning.
Want the full picture? Visit our ceramic coating service page for a complete breakdown of what's included, how our pricing works, and what to expect.
OUR PROCESS
How We Perform Ceramic Coating
Every ceramic coating job follows this exact process — no shortcuts, no skipped steps.
- 01
Pre-Coating Inspection
We inspect paint condition, identify defects, and confirm correction level needed before the coating is applied. Coating over scratched paint locks the scratches in — we will not do that.
- 02
Decontamination Wash
Foam pre-rinse, two-bucket hand wash, iron-fallout dissolution, and clay-bar treatment. The paint must be completely free of bonded contamination before correction begins.
- 03
Paint Correction
Single or multi-step polish — depending on tier — to remove swirl marks, water-spot etching, and light scratches. The coating bonds to the corrected surface, so this step locks in the finish.
- 04
Panel Wipe-Down
Every panel is wiped down with an oil-removing solvent to strip residual polish oils. This is the single most-skipped step in DIY coating jobs — and the reason most fail early.
- 05
Coating Application
Coating is applied panel-by-panel in a controlled environment (ideally a garage). Crosshatch wipe pattern, level, and flash — strict timing per panel to prevent high spots.
- 06
Cure Window + Care Instructions
Coating needs 12–24 hours of dry cure time. We hand over a written care guide — wash chemistry, dry-time after rain, no automatic washes — so the coating performs to its rated lifespan.
PRICING
Ceramic Coating Packages
Prep wash and polish included in all packages.
MOST POPULAR3-Year Ceramic
Mid-term gloss & protection
Starting at $899
Protection · ~36 months
- ✓Prep wash included
- ✓Polish included
- ✓Ceramic coating application
- ✓Enhanced hydrophobic protection
- ✓UV & oxidation protection
- ✓Deep gloss enhancement
BEST RESULTS5-Year Ceramic
Maximum long-term protection
Starting at $1,299
Protection · ~60 months
- ✓Prep wash included
- ✓Polish included
- ✓Ceramic coating application
- ✓Premium hydrophobic protection
- ✓Advanced UV & scratch resistance
- ✓Maximum gloss & clarity finish
All prices listed are for sedans and compact SUVs. Full-size SUVs, trucks, vans, RVs, and boats may be priced slightly higher. Final quote confirmed before we start — no surprise charges.
Need a custom build? Customize your package →
Our Work
Real Results from Across the Country
Every photo below comes from a verified customer booking. No stock images. No staged shots.
Sports car
Sports sedan
Adventure motorcycle
Class A motorhome
Boat exterior
Cabin cruiser
Car interior
Touring motorcycle
Electric sedan
VEHICLE COMPATIBILITY
Ceramic Coating for Every Vehicle We Service
Ceramic Coating works on every vehicle type — the process is the same, the scale changes. Choose a vehicle category to open the matching local page for Seattle.
Cars, SUVs & Trucks Detailing in Seattle
Sedans, coupes, hatchbacks, SUVs, and pickups — packages, pricing, and booking for your area.
View packagesBoats Detailing in Seattle
Hull, deck, and cabin-capable mobile service — see boat packages for your market.
View packagesMotorcycle Detailing in Seattle
Paint, chrome, wheels, and seat care scaled for bikes.
View packagesRVs Detailing in Seattle
Exterior, roof, and cabin work for motorhomes, fifth wheels, and campers.
View packagesWHY GO PROFESSIONAL
Why DIY Ceramic Kits Don't Last
Bottle ceramic kits sound great on paper. Here is why they fail — and what we do differently.
No Real Paint Prep
Consumer kits assume the paint is ready. It almost never is. We decontaminate, clay, correct, and panel-wipe before any coating bottle is opened.
Wrong Environment
Coating cures based on humidity and temperature. We apply in a controlled garage — not in a driveway in direct sun, which is when most DIY kits fail.
Application Errors
High spots, streaks, and missed panels show up days later as permanent visible defects. The technique to avoid them is what we are paid for.
Care After Coating
Coatings still need correct washing chemistry and care. We hand over written care instructions and offer maintenance check-ins for our Premium tier.
SERVICE AREA
Ceramic Coating Across Seattle
We perform ceramic coating at your location throughout Seattle and the surrounding metro — including:
AllynAnderson IslandAuburnBainbridge IslandBelfairBellevueBlack DiamondBonney LakeBothellBremertonBrinnonBuckleyBurleyBurtonCamano Island
Not in the list? Call us — we cover more than what's listed.
WHAT CUSTOMERS SAY
Rated 4.9 Stars for Ceramic Coating in Seattle
Seattle drivers trust us with their vehicles
FREQUENTLY ASKED QUESTIONS
Ceramic Coating Questions — Answered
How long does a ceramic coating actually last?
It depends on the tier and how the vehicle is cared for. Our 2-year coating typically holds 24–36 months with proper washing. The 5-year tier holds 4–6 years. The Lifetime tier is a multi-layer system designed for long-term ownership and includes maintenance check-ins.
Do I need paint correction before coating?
Almost always yes. Coating bonds to the surface it is applied to — any swirls or scratches in the paint will be locked in and amplified visually. Every one of our tiers includes the appropriate correction step.
Can I wash my car normally after coating?
Yes — but with the right chemistry. We hand over a wash-care guide. Avoid automatic washes with brushes and use pH-neutral car shampoo. The coating will release contamination easily during the wash.
What does the coating actually do?
It creates a hydrophobic, UV-resistant, chemical-resistant layer over the clear coat. Water beads, dirt struggles to bond, swirl marks from washing drop dramatically, and the paint stays deeper and glossier for years.
Can you coat wheels, glass, and plastic too?
Yes. Our 5-Year and Lifetime tiers include wheel barrel + face coating, glass hydrophobic coating, and trim coating. Trim coating prevents the gray fade on plastics.
What if the coating fails?
We back our work. If our coating fails outside expected wear, we will diagnose, re-prep, and re-coat the affected area. Care guidelines and annual maintenance check-ins are part of our higher tiers.
RELATED SERVICES
Services That Pair Well With Ceramic Coating
These are our other specialty detailing services in Seattle, WA, including Allyn, Anderson Island, and Auburn and surrounding areas. Each service is mobile — we come to your driveway, office lot, marina, or storage location with packages and booking for your market.
Interior Detailing in Seattle
Deep cabin cleaning, extraction, leather care, and odor treatment at your location
ViewExterior Detailing in Seattle
Hand wash, decontamination, polish, and protection for paint, wheels, and glass
ViewPaint Correction in Seattle
Multi-step correction for swirls, haze, and deeper paint defects
ViewWaxing & Sealants in Seattle
Hand wax or synthetic sealant to lock in gloss after a full detail
ViewClay Bar & Polishing in Seattle
Clay decontamination and finishing polish before protection layers
ViewCut & Buffing in Seattle
Heavy-cut compounding and buffing for oxidized or heavily marred finishes
ViewFrom the Blog
Detailing Tips & Guides for Seattle
Practical advice for drivers in Seattle — maintenance, protection, and what to expect from professional mobile detailing.
Ceramic Care
Is Ceramic Coating Worth It? The Honest Cost-Benefit Analysis
Ceramic coating costs $500–2,500. For long-term owners, the math works out. For lease drivers and short-term holders, it usually doesn't. Here's the honest analysis.
Read time: 5 min
Read the Guide
Paint Correction
1-Step vs 2-Step vs 3-Step Paint Correction: Which Level Do You Need?
Level 1 correction removes 60–70% of defects, Level 2 removes 85–95%, Level 3 approaches perfection. Here's how to choose based on defect severity and expected results.
Read time: 4 min
Read the Guide
Ceramic Care
Paint Correction Before Ceramic Coating: What Proper Prep Actually Includes
Coating over swirl marks locks them in for years. Proper prep includes inspection, decon, paint correction, panel wipe, and final inspection. Here's exactly what each step involves.
Read time: 7 min
Read the GuidePEOPLE ALSO SEARCH FOR
Serving Seattle and Surrounding Areas
Enter your ZIP code to confirm we cover your address in Seattle and nearby communities.
Book Your Ceramic Coating in Seattle Today
Mobile ceramic coating at your location with transparent pricing and reliable scheduling.
Fully insured team
Certified technician
Own water and power
On-site completion
Satisfaction guaranteed