1-Year Ceramic
Short-term paint protection
Starting at $699
Protection · ~12 months
- ✓Prep wash included
- ✓Polish included
- ✓Ceramic coating application
- ✓Hydrophobic water repellency
- ✓UV protection layer
- ✓Surface gloss enhancement
TULSA, OK · CERAMIC COATING
Ceramic Coating in Tulsa, OK
Paint protection that lasts, applied at your driveway by a trained crew
Professional mobile ceramic coating across Tulsa, Bixby, Jenks, and surrounding areas. Surface prep, decontamination, paint correction, and coating application all handled on-site at your location. Long-term paint protection without the shop visit or the wait.
4.9 StarsFully InsuredMobile ServiceExperienced Technicians
ABOUT THIS SERVICE
Tulsa Ceramic Coating — 3–5 Year Protection vs Wind
Temporary Protection Requires Constant Reapplication
Traditional wax protection gradually breaks down through washing, heat, contamination, and UV exposure, requiring frequent reapplication to maintain even minimal protection.
How Professional Ceramic Coating Provides Longer Protection
Our ceramic coating installation process creates a chemically bonded protective layer designed to last significantly longer than surface-level wax protection after paint is fully prepared.
Want the full picture? Visit our ceramic coating service page for a complete breakdown of what's included, how our pricing works, and what to expect.
OUR PROCESS
How We Perform Ceramic Coating
Every ceramic coating job follows this exact process — no shortcuts, no skipped steps.
- 01
Pre-Coating Inspection
We inspect paint condition, identify defects, and confirm correction level needed before the coating is applied. Coating over scratched paint locks the scratches in — we will not do that.
- 02
Decontamination Wash
Foam pre-rinse, two-bucket hand wash, iron-fallout dissolution, and clay-bar treatment. The paint must be completely free of bonded contamination before correction begins.
- 03
Paint Correction
Single or multi-step polish — depending on tier — to remove swirl marks, water-spot etching, and light scratches. The coating bonds to the corrected surface, so this step locks in the finish.
- 04
Panel Wipe-Down
Every panel is wiped down with an oil-removing solvent to strip residual polish oils. This is the single most-skipped step in DIY coating jobs — and the reason most fail early.
- 05
Coating Application
Coating is applied panel-by-panel in a controlled environment (ideally a garage). Crosshatch wipe pattern, level, and flash — strict timing per panel to prevent high spots.
- 06
Cure Window + Care Instructions
Coating needs 12–24 hours of dry cure time. We hand over a written care guide — wash chemistry, dry-time after rain, no automatic washes — so the coating performs to its rated lifespan.
PRICING
Ceramic Coating Packages
Prep wash and polish included in all packages.
MOST POPULAR3-Year Ceramic
Mid-term gloss & protection
Starting at $899
Protection · ~36 months
- ✓Prep wash included
- ✓Polish included
- ✓Ceramic coating application
- ✓Enhanced hydrophobic protection
- ✓UV & oxidation protection
- ✓Deep gloss enhancement
BEST RESULTS5-Year Ceramic
Maximum long-term protection
Starting at $1,299
Protection · ~60 months
- ✓Prep wash included
- ✓Polish included
- ✓Ceramic coating application
- ✓Premium hydrophobic protection
- ✓Advanced UV & scratch resistance
- ✓Maximum gloss & clarity finish
All prices listed are for sedans and compact SUVs. Full-size SUVs, trucks, vans, RVs, and boats may be priced slightly higher. Final quote confirmed before we start — no surprise charges.
Need a custom build? Customize your package →
Our Work
Real Results from Across the Country
Every photo below comes from a verified customer booking. No stock images. No staged shots.
Sports car
Sports sedan
Adventure motorcycle
Class A motorhome
Boat exterior
Cabin cruiser
Car interior
Touring motorcycle
Electric sedan
VEHICLE COMPATIBILITY
Ceramic Coating for Every Vehicle We Service
Ceramic Coating works on every vehicle type — the process is the same, the scale changes. Choose a vehicle category to open the matching local page for Tulsa.
Cars, SUVs & Trucks Detailing in Tulsa
Sedans, coupes, hatchbacks, SUVs, and pickups — packages, pricing, and booking for your area.
View packagesBoats Detailing in Tulsa
Hull, deck, and cabin-capable mobile service — see boat packages for your market.
View packagesMotorcycle Detailing in Tulsa
Paint, chrome, wheels, and seat care scaled for bikes.
View packagesRVs Detailing in Tulsa
Exterior, roof, and cabin work for motorhomes, fifth wheels, and campers.
View packagesWHY GO PROFESSIONAL
Why DIY Ceramic Kits Don't Last
Bottle ceramic kits sound great on paper. Here is why they fail — and what we do differently.
No Real Paint Prep
Consumer kits assume the paint is ready. It almost never is. We decontaminate, clay, correct, and panel-wipe before any coating bottle is opened.
Wrong Environment
Coating cures based on humidity and temperature. We apply in a controlled garage — not in a driveway in direct sun, which is when most DIY kits fail.
Application Errors
High spots, streaks, and missed panels show up days later as permanent visible defects. The technique to avoid them is what we are paid for.
Care After Coating
Coatings still need correct washing chemistry and care. We hand over written care instructions and offer maintenance check-ins for our Premium tier.
SERVICE AREA
Ceramic Coating Across Tulsa
We perform ceramic coating at your location throughout Tulsa and the surrounding metro — including:
AdairAvantBarnsdallBartlesvilleBeggsBig CabinBixbyBoyntonBristowBroken ArrowCastleCatoosaChelseaChouteauClaremore
Not in the list? Call us — we cover more than what's listed.
WHAT CUSTOMERS SAY
Rated 4.9 Stars for Ceramic Coating in Tulsa
Tulsa drivers trust us with their vehicles
FREQUENTLY ASKED QUESTIONS
Ceramic Coating Questions — Answered
How long does a ceramic coating actually last?
It depends on the tier and how the vehicle is cared for. Our 2-year coating typically holds 24–36 months with proper washing. The 5-year tier holds 4–6 years. The Lifetime tier is a multi-layer system designed for long-term ownership and includes maintenance check-ins.
Do I need paint correction before coating?
Almost always yes. Coating bonds to the surface it is applied to — any swirls or scratches in the paint will be locked in and amplified visually. Every one of our tiers includes the appropriate correction step.
Can I wash my car normally after coating?
Yes — but with the right chemistry. We hand over a wash-care guide. Avoid automatic washes with brushes and use pH-neutral car shampoo. The coating will release contamination easily during the wash.
What does the coating actually do?
It creates a hydrophobic, UV-resistant, chemical-resistant layer over the clear coat. Water beads, dirt struggles to bond, swirl marks from washing drop dramatically, and the paint stays deeper and glossier for years.
Can you coat wheels, glass, and plastic too?
Yes. Our 5-Year and Lifetime tiers include wheel barrel + face coating, glass hydrophobic coating, and trim coating. Trim coating prevents the gray fade on plastics.
What if the coating fails?
We back our work. If our coating fails outside expected wear, we will diagnose, re-prep, and re-coat the affected area. Care guidelines and annual maintenance check-ins are part of our higher tiers.
RELATED SERVICES
Services That Pair Well With Ceramic Coating
These are our other specialty detailing services in Tulsa, OK, including Adair, Avant, and Barnsdall and surrounding areas. Each service is mobile — we come to your driveway, office lot, marina, or storage location with packages and booking for your market.
Interior Detailing in Tulsa
Deep cabin cleaning, extraction, leather care, and odor treatment at your location
ViewExterior Detailing in Tulsa
Hand wash, decontamination, polish, and protection for paint, wheels, and glass
ViewPaint Correction in Tulsa
Multi-step correction for swirls, haze, and deeper paint defects
ViewWaxing & Sealants in Tulsa
Hand wax or synthetic sealant to lock in gloss after a full detail
ViewClay Bar & Polishing in Tulsa
Clay decontamination and finishing polish before protection layers
ViewCut & Buffing in Tulsa
Heavy-cut compounding and buffing for oxidized or heavily marred finishes
ViewFrom the Blog
Detailing Tips & Guides for Tulsa
Practical advice for drivers in Tulsa — maintenance, protection, and what to expect from professional mobile detailing.
Ceramic Care
Paint Correction Before Ceramic Coating: What Proper Prep Actually Includes
Coating over swirl marks locks them in for years. Proper prep includes inspection, decon, paint correction, panel wipe, and final inspection. Here's exactly what each step involves.
Read time: 7 min
Read the Guide
Ceramic Care
How Long Does Ceramic Coating Last? A Realistic Durability Guide
Consumer ceramic kits realistically last 1–2 years. Mid-grade pro coatings last 2–3 years. Top-tier with maintenance reaches 5–7. Here's what determines where your coating lands.
Read time: 5 min
Read the Guide
Paint Correction
1-Step vs 2-Step vs 3-Step Paint Correction: Which Level Do You Need?
Level 1 correction removes 60–70% of defects, Level 2 removes 85–95%, Level 3 approaches perfection. Here's how to choose based on defect severity and expected results.
Read time: 4 min
Read the GuidePEOPLE ALSO SEARCH FOR
Serving Tulsa and Surrounding Areas
Enter your ZIP code to confirm we cover your address in Tulsa and nearby communities.
Book Your Ceramic Coating in Tulsa Today
Mobile ceramic coating at your location with transparent pricing and reliable scheduling.
Fully insured team
Certified technician
Own water and power
On-site completion
Satisfaction guaranteed