Clay Bar
Paint decontamination only
Starting at $249
Typical time · ~2 hours
- ✓Full exterior foam wash
- ✓Clay bar decontamination
- ✓Paint surface smoothing
- ✓Wheel & tire cleaning
- ✓Window cleaning (exterior)
- ✓Hand dry & inspection wipe
ORLANDO, FL · CLAY BAR & POLISHING
Exterior Paint Decontamination in Orlando, FL
Mobile clay bar service that removes what washing leaves behind
Professional clay bar and polishing at your location. Our mobile crew serves Orlando, Oviedo, Daytona Beach, and surrounding areas, handling full panel decontamination and gloss-restoring polish on-site at your driveway or office. Contaminants out, clarity back, no shop visit.
4.9 Rating in OrlandoFully Insured100% Satisfaction GuaranteedMobile — We Come to You
ABOUT THIS SERVICE
Why Polishing Alone Does Not Fully Restore Contaminated Paint
Embedded Particles Continue Affecting The Surface
Polishing over bonded contamination may temporarily improve gloss but leaves embedded particles behind that continue causing haze and surface deterioration afterward.
How Professional Clay Bar Treatment Improves Correction Results
Our professional mobile detailing process removes contamination before polishing begins so correction stages refine actual paint instead of polishing over embedded debris.
OUR PROCESS
How We Perform Clay Bar & Polishing
Every clay bar & polishing job follows this exact process — no shortcuts, no skipped steps.
- 01
Pre-Wash Inspection
We feel the paint, identify high-contamination zones, and confirm clay grade. Aggressive clay on a delicate finish will marr — we choose product carefully.
- 02
Foam + Hand Wash
Foam pre-wash, two-bucket contact wash, wheels and trim done separately. Paint must be free of loose grit before clay touches it.
- 03
Iron-Fallout Treatment
Iron-removal chemistry is sprayed on, dwells, and turns red as it dissolves bonded brake-dust contamination. Then it is rinsed off — clay is more effective afterwards.
- 04
Clay-Bar Pass
Lubricant + clay across every panel, wheel face, glass, and trim. Repeated until the surface is glass-smooth. Clay is folded as it loads up to expose a fresh face.
- 05
Light Polish (Tier 2+)
Dual-action polisher with a soft pad and finishing polish — reduces minor swirl marks and brings depth back to the clear coat. Surface is wiped down before the next step.
- 06
Sealant + Trim
Paint sealant locks the freshly decontaminated surface in. Trim dressing, tire dressing, and glass hydrophobic spray finish the visual.
PRICING
Clay Bar Packages
Prices for sedans and compact SUVs — other vehicles may cost extra.
MOST POPULARClay Bar + Wax
Decontamination + shine
Starting at $269
Typical time · ~2.5 hours
- ✓Everything in Clay Bar
- ✓Spray wax included
- ✓Enhanced gloss finish
- ✓Tire dressing
- ✓Window streak-free finish
- ✓Final QC inspection wipe
Clay Bar + Sealant
Decontamination + long-term protection
Starting at $349
Typical time · ~3 hours
- ✓Everything in Clay Bar
- ✓Sealant wax included
- ✓3–6 month paint protection
- ✓Tire dressing
- ✓Window cleaning & streak-free finish
- ✓Final QC inspection wipe
All prices listed are for sedans and compact SUVs. Full-size SUVs, trucks, vans, RVs, and boats may be priced slightly higher. Final quote confirmed before we start — no surprise charges.
Need a custom build? Customize your package →
Proof Of Work
Our Work
Real results from real jobs across cars, boats, and RVs.
Motorcycle Detail
Boat Detail
Truck Detail
RV Detail
Car Detail
Car Detail
VEHICLE COMPATIBILITY
Clay Bar & Polishing for Every Vehicle We Service
Clay Bar & Polishing works on every vehicle type — the process is the same, the scale changes. Choose a vehicle category to open the matching local page for Orlando.
Cars, SUVs & Trucks
Sedans, coupes, hatchbacks, SUVs, and pickups — packages, pricing, and booking for your area.
View packagesBoats
Hull, deck, and cabin-capable mobile service — see boat packages for your market.
View packagesMotorcycle
Paint, chrome, wheels, and seat care scaled for bikes.
View packagesRVs
Exterior, roof, and cabin work for motorhomes, fifth wheels, and campers.
View packagesWHY GO PROFESSIONAL
Why DIY Clay Goes Wrong
Clay is simple in theory and easy to mess up in practice. Here is what we do that DIY misses.
Skipping the Iron Pre-Treatment
Without iron-fallout chemistry first, clay alone takes much longer and is more aggressive than it needs to be. The chemistry softens contamination before the clay touches it.
Reusing Loaded-Up Clay
DIY clay gets contaminated quickly. Used past a certain point, it will drag particles across the paint and create marring. We fold and replace as soon as it loads up.
Wrong Lubricant
Quick-detail spray works as clay lube; tap water does not. Insufficient lube is the most common cause of clay-induced marring on consumer attempts.
No Polish Step After
Even a perfectly executed clay pass leaves the paint slightly hazy — that is what the light polish step fixes. Skipping polish leaves the paint less glossy than it could be.
SERVICE AREA
Clay Bar & Polishing Across Orlando
We perform clay bar & polishing at your location throughout Orlando and the surrounding metro — including:
Altamonte SpringsAltoonaAlturasApopkaAstatulaAstorAuburndaleBabson ParkBarbervilleBartowBelleviewBrooksvilleBushnellCandlerCape Canaveral
Not in the list? Call us — we cover more than what's listed.
WHAT CUSTOMERS SAY
Rated 4.9 Stars for Clay Bar & Polishing in Orlando
Orlando drivers trust us with their vehicles
FREQUENTLY ASKED QUESTIONS
Clay Bar & Polishing Questions — Answered
Used correctly with enough lubrication, fresh clay does not damage paint. Used dry, reused past its lifespan, or on un-washed paint with grit on the surface, clay will marr — which is why we wash and pre-treat first and replace clay as it loads up.
Daily drivers benefit from a clay pass every 6–12 months. Garage-kept cars can stretch to once a year or every other year. Tar-heavy or industrial-zone driving may need it more often.
No — clay removes bonded contamination above the paint surface. Scratches are below the surface and require polishing or paint correction.
Yes — every protection layer is only as good as the surface under it. Clay + polish is the standard prep step under wax, sealant, and coating jobs.
Clay leaves the paint slightly hazy. A light polish refines the finish, reduces swirl marks, and brings out the deepest gloss before the protection layer is applied.
Yes — glass clay removes water-spot etching and overspray, and wheel-face clay removes embedded brake dust. Both are part of our Premium tier by default.
RELATED SERVICES
Services That Pair Well With Clay Bar & Polishing
Customers often combine this service with one of the following for a complete result.
Exterior Detailing
Clay-bar + polish is part of every Full Exterior package
ViewPaint Correction
When the paint has more than light swirls, correction is the better starting point
ViewCeramic Coating
Clay + polish is the required prep step under every coating job
ViewWaxing & Sealants
Apply on top of a freshly clayed, polished surface for best results
ViewCut & Buffing
For heavily oxidized paint that needs more than a polish stage
ViewBook Your Clay Bar & Polishing in Orlando Today
Mobile clay bar & polishing at your location with transparent pricing and reliable scheduling.
Fully insured team
Certified technician
Own water and power
On-site completion
Satisfaction guaranteed
From the Blog
Detailing Tips & Guides
Learn how to keep your vehicle looking its best between professional details.