Skip to main content
Ceramic Coating in Memphis

MEMPHIS, TN · CERAMIC COATING

Mobile Ceramic Coating Service in Memphis, TN

Ceramic coating done right at your location, surface prep and all

Ceramic coating that actually holds starts with clean, corrected paint. Our mobile service covers Memphis, Munford, Arlington, and surrounding areas, performing wax stripping, surface decontamination, and paint correction before coating application at your driveway or office. No shortcuts, no shop drop-off.

4.9 Rating in MemphisFully Insured100% Satisfaction GuaranteedMobile — We Come to You

ABOUT THIS SERVICE

Why Iron Decontamination Is Critical Before Ceramic Coating

Metallic Particles Interfere With Coating Bonding

Brake dust and industrial fallout leave microscopic iron particles embedded in clearcoat that continue oxidizing beneath ceramic coating if not removed before application.

How Professional Ceramic Coating Prep Removes Iron Contamination

Our ceramic coating preparation process includes chemical iron decontamination before polishing and installation begin so embedded particles are removed safely from the paint surface.

OUR PROCESS

How We Perform Ceramic Coating

Every ceramic coating job follows this exact process — no shortcuts, no skipped steps.

  1. 01

    Pre-Coating Inspection

    We inspect paint condition, identify defects, and confirm correction level needed before the coating is applied. Coating over scratched paint locks the scratches in — we will not do that.

  2. 02

    Decontamination Wash

    Foam pre-rinse, two-bucket hand wash, iron-fallout dissolution, and clay-bar treatment. The paint must be completely free of bonded contamination before correction begins.

  3. 03

    Paint Correction

    Single or multi-step polish — depending on tier — to remove swirl marks, water-spot etching, and light scratches. The coating bonds to the corrected surface, so this step locks in the finish.

  4. 04

    Panel Wipe-Down

    Every panel is wiped down with an oil-removing solvent to strip residual polish oils. This is the single most-skipped step in DIY coating jobs — and the reason most fail early.

  5. 05

    Coating Application

    Coating is applied panel-by-panel in a controlled environment (ideally a garage). Crosshatch wipe pattern, level, and flash — strict timing per panel to prevent high spots.

  6. 06

    Cure Window + Care Instructions

    Coating needs 12–24 hours of dry cure time. We hand over a written care guide — wash chemistry, dry-time after rain, no automatic washes — so the coating performs to its rated lifespan.

PRICING

Ceramic Coating Packages

Prep wash and polish included in all packages.

1-Year Ceramic — ceramic coating in Memphis

1-Year Ceramic

Short-term paint protection

Starting at $699
Protection · ~12 months
  • Prep wash included
  • Polish included
  • Ceramic coating application
  • Hydrophobic water repellency
  • UV protection layer
  • Surface gloss enhancement
3-Year Ceramic — ceramic coating in Memphis
MOST POPULAR

3-Year Ceramic

Mid-term gloss & protection

Starting at $899
Protection · ~36 months
  • Prep wash included
  • Polish included
  • Ceramic coating application
  • Enhanced hydrophobic protection
  • UV & oxidation protection
  • Deep gloss enhancement
5-Year Ceramic — ceramic coating in Memphis
BEST RESULTS

5-Year Ceramic

Maximum long-term protection

Starting at $1,299
Protection · ~60 months
  • Prep wash included
  • Polish included
  • Ceramic coating application
  • Premium hydrophobic protection
  • Advanced UV & scratch resistance
  • Maximum gloss & clarity finish

All prices listed are for sedans and compact SUVs. Full-size SUVs, trucks, vans, RVs, and boats may be priced slightly higher. Final quote confirmed before we start — no surprise charges.
Need a custom build? Customize your package →

Proof Of Work

Our Work

Real results from real jobs across cars, boats, and RVs.

  • Motorcycle after professional mobile detailing

    Motorcycle Detail

  • Boat after professional mobile detailing

    Boat Detail

  • Truck after professional mobile detailing

    Truck Detail

  • RV after professional mobile detailing

    RV Detail

  • Car after professional mobile detailing

    Car Detail

  • Sports car after professional mobile detailing

    Car Detail

See more of our work

WHY GO PROFESSIONAL

Why DIY Ceramic Kits Don't Last

Bottle ceramic kits sound great on paper. Here is why they fail — and what we do differently.

No Real Paint Prep

Consumer kits assume the paint is ready. It almost never is. We decontaminate, clay, correct, and panel-wipe before any coating bottle is opened.

Wrong Environment

Coating cures based on humidity and temperature. We apply in a controlled garage — not in a driveway in direct sun, which is when most DIY kits fail.

Application Errors

High spots, streaks, and missed panels show up days later as permanent visible defects. The technique to avoid them is what we are paid for.

Care After Coating

Coatings still need correct washing chemistry and care. We hand over written care instructions and offer maintenance check-ins for our Premium tier.

SERVICE AREA

Ceramic Coating Across Memphis

We perform ceramic coating at your location throughout Memphis and the surrounding metro — including:

ArkabutlaArlingtonAtokaBassettBradenBrickeysBrightonBrunswickBurdetteBurlisonByhaliaCaldwellCarawayCherry ValleyClarkedale

Not in the list? Call us — we cover more than what's listed.

WHAT CUSTOMERS SAY

Rated 4.9 Stars for Ceramic Coating in Memphis

Memphis drivers trust us with their vehicles

Google

Had ceramic coating added to my sedan and the gloss looks incredible in sunlight now.

Daniel P.

Germantown

Yelp

The coating made washing my SUV much easier already. Water beads off perfectly after rain.

Rachel W.

Bartlett

Google

Crew explained every prep and curing step clearly before starting. Final finish looked smooth and reflective.

Brandon K.

Collierville

Yelp

My car stays parked outside daily so I wanted extra protection. Really impressed with the coating so far.

Ashley M.

Cordova

FREQUENTLY ASKED QUESTIONS

Ceramic Coating Questions — Answered

It depends on the tier and how the vehicle is cared for. Our 2-year coating typically holds 24–36 months with proper washing. The 5-year tier holds 4–6 years. The Lifetime tier is a multi-layer system designed for long-term ownership and includes maintenance check-ins.

Almost always yes. Coating bonds to the surface it is applied to — any swirls or scratches in the paint will be locked in and amplified visually. Every one of our tiers includes the appropriate correction step.

Yes — but with the right chemistry. We hand over a wash-care guide. Avoid automatic washes with brushes and use pH-neutral car shampoo. The coating will release contamination easily during the wash.

It creates a hydrophobic, UV-resistant, chemical-resistant layer over the clear coat. Water beads, dirt struggles to bond, swirl marks from washing drop dramatically, and the paint stays deeper and glossier for years.

Yes. Our 5-Year and Lifetime tiers include wheel barrel + face coating, glass hydrophobic coating, and trim coating. Trim coating prevents the gray fade on plastics.

We back our work. If our coating fails outside expected wear, we will diagnose, re-prep, and re-coat the affected area. Care guidelines and annual maintenance check-ins are part of our higher tiers.

Book Your Ceramic Coating in Memphis Today

Mobile ceramic coating at your location with transparent pricing and reliable scheduling.

Fully insured team

Certified technician

Own water and power

On-site completion

Satisfaction guaranteed

From the Blog

Detailing Tips & Guides

Learn how to keep your vehicle looking its best between professional details.