Level 1
Light swirls & surface defects
Starting at $399
Typical time · ~2.5 hours
- ✓Single-stage machine polish
- ✓Light swirl mark removal
- ✓Surface clarity improvement
- ✓Paint gloss restoration
- ✓Hand inspection wipe
- ✓Exterior rinse & dry
JACKSONVILLE, FL · PAINT CORRECTION
Paint Restoration Services in Jacksonville, FL
Professional paint correction at your driveway, no shop drop-off needed
Our mobile paint correction crew brings the right tools and the right process to your location across Jacksonville, Hilliard, Bryceville, and surrounding areas. Multi-stage compounding, swirl and defect removal, and finishing polish all done on-site at your driveway or office. No shop, no waiting.
4.9 Rating in JacksonvilleFully Insured100% Satisfaction GuaranteedMobile — We Come to You
ABOUT THIS SERVICE
Why Paint Correction Should Be Done Before Ceramic Coating
Ceramic Coating Amplifies Whatever Is Underneath It
Ceramic coating increases gloss and reflection, which also makes swirl marks, haze, oxidation, and water spot etching more noticeable if the paint is not corrected beforehand.
How Professional Paint Correction Prepares Paint For Coating
Our professional paint correction service removes visible defects before ceramic coating installation begins. Machine polishing restores clarity so the coating bonds to the cleanest and sharpest possible version of the paint.
OUR PROCESS
How We Perform Paint Correction
Every paint correction job follows this exact process — no shortcuts, no skipped steps.
- 01
Inspection + Test Spot
We inspect the paint under direct lighting, measure clear-coat thickness, and run a test spot to confirm compound and pad selection. This sets the plan for the entire correction.
- 02
Decontamination Wash
Foam pre-wash, two-bucket hand wash, iron-fallout treatment, and clay-bar pass. Paint must be completely clean and free of bonded contamination before any polishing.
- 03
Cut Stage (if needed)
For medium-to-heavy defects, a heavier compound on a cutting pad removes swirl marks, scratches, and oxidation. Paint thickness is re-measured after this stage.
- 04
Polishing Stage
A finishing polish on a softer pad refines the clear coat after the cut stage. This removes any micro-marring left by the compound and brings out the deepest gloss.
- 05
Inspection Under Light
Paint is inspected under multiple light sources — direct sun, halogen, LED — to confirm every defect has been addressed. Touch-ups are performed where needed.
- 06
Lock-In Protection
We finish with a sealant (Single / Two-Stage) or coating-ready prep (Multi-Stage). Without protection, corrected paint is vulnerable to the same defects coming back.
PRICING
Paint Correction Packages
Prices for sedans and compact SUVs — other vehicles may cost extra.
MOST POPULARLevel 2
Moderate scratches & water spots
Starting at $499
Typical time · ~3.5 hours
- ✓Two-stage correction
- ✓Moderate swirl & scratch removal
- ✓Water spot removal
- ✓Paint depth restoration
- ✓Hand inspection & final wipe
- ✓Exterior rinse & dry
Level 3
Heavy defects & deep scratches
Starting at $599
Typical time · ~5 hours
- ✓Multi-stage correction
- ✓Deep scratch & defect removal
- ✓Heavy water spot & etching removal
- ✓Full paint rejuvenation
- ✓Final QC inspection & hand wipe
- ✓Exterior rinse & dry
All prices listed are for sedans and compact SUVs. Full-size SUVs, trucks, vans, RVs, and boats may be priced slightly higher. Final quote confirmed before we start — no surprise charges.
Need a custom build? Customize your package →
Proof Of Work
Our Work
Real results from real jobs across cars, boats, and RVs.
Motorcycle Detail
Boat Detail
Truck Detail
RV Detail
Car Detail
Car Detail
VEHICLE COMPATIBILITY
Paint Correction for Every Vehicle We Service
Paint Correction works on every vehicle type — the process is the same, the scale changes. Choose a vehicle category to open the matching local page for Jacksonville.
Cars, SUVs & Trucks
Sedans, coupes, hatchbacks, SUVs, and pickups — packages, pricing, and booking for your area.
View packagesBoats
Hull, deck, and cabin-capable mobile service — see boat packages for your market.
View packagesMotorcycle
Paint, chrome, wheels, and seat care scaled for bikes.
View packagesRVs
Exterior, roof, and cabin work for motorhomes, fifth wheels, and campers.
View packagesWHY GO PROFESSIONAL
Why DIY Paint Correction Goes Wrong
A polishing kit and a YouTube video is how many cars end up with thinned clear coat or hologram marks.
No Paint-Thickness Measurement
Clear coat is typically 40–80 microns. Removing even 5 microns wrong is permanent. We measure before, during, and after correction.
Wrong Compound + Pad
Heavy compound on a hard pad on soft clear coat will ruin the paint. We test, select, and re-evaluate compound and pad as we work through the vehicle.
Holograms and Micromarring
Rotary polishers in inexperienced hands create hologram swirl patterns that are worse than the originals. Our dual-action and forced-rotation polishers reduce that risk dramatically.
No Protection After Correction
Corrected paint with no protection layer is exposed to the same daily contamination. We always finish with sealant — or recommend a ceramic coating — to lock the result in.
SERVICE AREA
Paint Correction Across Jacksonville
We perform paint correction at your location throughout Jacksonville and the surrounding metro — including:
Atlantic BeachBostwickBrookerBrycevilleCallahanDoctors InletEarletonEast PalatkaElktonFernandina BeachFleming IslandFlorahomeFolkstonGlen Saint MaryGraham
Not in the list? Call us — we cover more than what's listed.
WHAT CUSTOMERS SAY
Rated 4.9 Stars for Paint Correction in Jacksonville
Jacksonville drivers trust us with their vehicles
FREQUENTLY ASKED QUESTIONS
Paint Correction Questions — Answered
Most light-to-medium swirl marks and scratches yes. Deep scratches that have cut through the clear coat into the base coat cannot be polished out — those require touch-up paint or refinishing. We will tell you upfront what is recoverable.
Single-stage correction typically removes 2–5 microns. Two-stage 5–10 microns. Multi-stage up to 15 microns. We measure before, during, and after to make sure we stay well within safe limits — typical clear coat is 40–80 microns total.
Strongly recommended — but not required. Without a coating or strong sealant, corrected paint is exposed and will swirl again the next time the car is washed. Coating locks the correction in for years.
If protected with sealant, the corrected finish typically holds 6–12 months before fine swirls reappear. With a ceramic coating, it holds for years.
Yes — new cars almost always have transit swirls, dealership-wash marks, and shipping defects. Many of our coating customers correct before coating their new vehicle.
Single-stage 4–5 hours. Two-stage 6–8 hours. Multi-stage 1.5–2 days. We work in your garage or driveway and time the stages so the car cures correctly.
RELATED SERVICES
Services That Pair Well With Paint Correction
Customers often combine this service with one of the following for a complete result.
Ceramic Coating
Lock in the corrected finish for years — strongly recommended after correction
ViewExterior Detailing
Includes a light polish stage as part of the regular detail
ViewClay Bar & Polishing
The decontamination + finishing pass behind every correction job
ViewCut & Buffing
Heavy-cut machine compounding for deeper oxidation and scratches
ViewWaxing & Sealants
Short-term protection if a coating is not in the plan yet
ViewBook Your Paint Correction in Jacksonville Today
Mobile paint correction at your location with transparent pricing and reliable scheduling.
Fully insured team
Certified technician
Own water and power
On-site completion
Satisfaction guaranteed
From the Blog
Detailing Tips & Guides
Learn how to keep your vehicle looking its best between professional details.