1-Year Ceramic
Short-term paint protection
Starting at $699
Protection · ~12 months
- ✓Prep wash included
- ✓Polish included
- ✓Ceramic coating application
- ✓Hydrophobic water repellency
- ✓UV protection layer
- ✓Surface gloss enhancement
BALTIMORE, MD · CERAMIC COATING
Mobile Ceramic Coating in Baltimore, MD
Professional ceramic coating without the shop drop-off or the wait
Stacking ceramic coating over contaminated or swirled paint locks the damage in. Our mobile ceramic coating service covers Baltimore, Pikesville, Glen Burnie, and surrounding areas, starting with proper prep — wax removal, decontamination, and correction where needed — before any coating is applied. All done on-site at your location.
4.9 Rating in BaltimoreFully Insured100% Satisfaction GuaranteedMobile — We Come to You
ABOUT THIS SERVICE
Why Surface Preparation Matters More Than The Coating Product
Even Premium Coatings Fail On Poorly Prepared Paint
Ceramic coating performance depends more on the condition of the paint underneath than the brand printed on the bottle. Contamination, oxidation, and leftover sealants interfere with chemical bonding and shorten coating durability significantly.
How Professional Ceramic Coating Is Applied Properly
Our mobile ceramic coating installation process includes stripping old protection layers, chemical decontamination, clay treatment, paint correction where needed, and controlled application conditions designed specifically for long-term coating adhesion.
OUR PROCESS
How We Perform Ceramic Coating
Every ceramic coating job follows this exact process — no shortcuts, no skipped steps.
- 01
Pre-Coating Inspection
We inspect paint condition, identify defects, and confirm correction level needed before the coating is applied. Coating over scratched paint locks the scratches in — we will not do that.
- 02
Decontamination Wash
Foam pre-rinse, two-bucket hand wash, iron-fallout dissolution, and clay-bar treatment. The paint must be completely free of bonded contamination before correction begins.
- 03
Paint Correction
Single or multi-step polish — depending on tier — to remove swirl marks, water-spot etching, and light scratches. The coating bonds to the corrected surface, so this step locks in the finish.
- 04
Panel Wipe-Down
Every panel is wiped down with an oil-removing solvent to strip residual polish oils. This is the single most-skipped step in DIY coating jobs — and the reason most fail early.
- 05
Coating Application
Coating is applied panel-by-panel in a controlled environment (ideally a garage). Crosshatch wipe pattern, level, and flash — strict timing per panel to prevent high spots.
- 06
Cure Window + Care Instructions
Coating needs 12–24 hours of dry cure time. We hand over a written care guide — wash chemistry, dry-time after rain, no automatic washes — so the coating performs to its rated lifespan.
PRICING
Ceramic Coating Packages
Prep wash and polish included in all packages.
MOST POPULAR3-Year Ceramic
Mid-term gloss & protection
Starting at $899
Protection · ~36 months
- ✓Prep wash included
- ✓Polish included
- ✓Ceramic coating application
- ✓Enhanced hydrophobic protection
- ✓UV & oxidation protection
- ✓Deep gloss enhancement
BEST RESULTS5-Year Ceramic
Maximum long-term protection
Starting at $1,299
Protection · ~60 months
- ✓Prep wash included
- ✓Polish included
- ✓Ceramic coating application
- ✓Premium hydrophobic protection
- ✓Advanced UV & scratch resistance
- ✓Maximum gloss & clarity finish
All prices listed are for sedans and compact SUVs. Full-size SUVs, trucks, vans, RVs, and boats may be priced slightly higher. Final quote confirmed before we start — no surprise charges.
Need a custom build? Customize your package →
Proof Of Work
Our Work
Real results from real jobs across cars, boats, and RVs.
Motorcycle Detail
Boat Detail
Truck Detail
RV Detail
Car Detail
Car Detail
VEHICLE COMPATIBILITY
Ceramic Coating for Every Vehicle We Service
Ceramic Coating works on every vehicle type — the process is the same, the scale changes. Choose a vehicle category to open the matching local page for Baltimore.
Cars, SUVs & Trucks
Sedans, coupes, hatchbacks, SUVs, and pickups — packages, pricing, and booking for your area.
View packagesBoats
Hull, deck, and cabin-capable mobile service — see boat packages for your market.
View packagesMotorcycle
Paint, chrome, wheels, and seat care scaled for bikes.
View packagesRVs
Exterior, roof, and cabin work for motorhomes, fifth wheels, and campers.
View packagesWHY GO PROFESSIONAL
Why DIY Ceramic Kits Don't Last
Bottle ceramic kits sound great on paper. Here is why they fail — and what we do differently.
No Real Paint Prep
Consumer kits assume the paint is ready. It almost never is. We decontaminate, clay, correct, and panel-wipe before any coating bottle is opened.
Wrong Environment
Coating cures based on humidity and temperature. We apply in a controlled garage — not in a driveway in direct sun, which is when most DIY kits fail.
Application Errors
High spots, streaks, and missed panels show up days later as permanent visible defects. The technique to avoid them is what we are paid for.
Care After Coating
Coatings still need correct washing chemistry and care. We hand over written care instructions and offer maintenance check-ins for our Premium tier.
SERVICE AREA
Ceramic Coating Across Baltimore
We perform ceramic coating at your location throughout Baltimore and the surrounding metro — including:
AbbottstownAberdeenAberdeen Proving GroundAbingdonAccokeekAdamstownAirvilleAlexandriaAndrews Air Force BaseAnnandaleAnnapolisAnnapolis JunctionAquascoArlingtonArnold
Not in the list? Call us — we cover more than what's listed.
WHAT CUSTOMERS SAY
Rated 4.9 Stars for Ceramic Coating in Baltimore
Baltimore drivers trust us with their vehicles
FREQUENTLY ASKED QUESTIONS
Ceramic Coating Questions — Answered
It depends on the tier and how the vehicle is cared for. Our 2-year coating typically holds 24–36 months with proper washing. The 5-year tier holds 4–6 years. The Lifetime tier is a multi-layer system designed for long-term ownership and includes maintenance check-ins.
Almost always yes. Coating bonds to the surface it is applied to — any swirls or scratches in the paint will be locked in and amplified visually. Every one of our tiers includes the appropriate correction step.
Yes — but with the right chemistry. We hand over a wash-care guide. Avoid automatic washes with brushes and use pH-neutral car shampoo. The coating will release contamination easily during the wash.
It creates a hydrophobic, UV-resistant, chemical-resistant layer over the clear coat. Water beads, dirt struggles to bond, swirl marks from washing drop dramatically, and the paint stays deeper and glossier for years.
Yes. Our 5-Year and Lifetime tiers include wheel barrel + face coating, glass hydrophobic coating, and trim coating. Trim coating prevents the gray fade on plastics.
We back our work. If our coating fails outside expected wear, we will diagnose, re-prep, and re-coat the affected area. Care guidelines and annual maintenance check-ins are part of our higher tiers.
RELATED SERVICES
Services That Pair Well With Ceramic Coating
Customers often combine this service with one of the following for a complete result.
Paint Correction
The required prep step under every successful ceramic coating
ViewExterior Detailing
Recommended every 6–12 months after coating to maintain the surface
ViewClay Bar & Polishing
Decontamination and finishing pass — included in every coating prep
ViewWaxing & Sealants
Short-term protection for vehicles not ready for a full coating
ViewInterior Detailing
Pair with coating for a complete top-to-bottom vehicle restoration
ViewBook Your Ceramic Coating in Baltimore Today
Mobile ceramic coating at your location with transparent pricing and reliable scheduling.
Fully insured team
Certified technician
Own water and power
On-site completion
Satisfaction guaranteed
From the Blog
Detailing Tips & Guides
Learn how to keep your vehicle looking its best between professional details.